Air Conditioner

Installation Instructions

Indoor Unit Installation Diagram

Attention not to bend up drain hose

Piping direction

Front side [A] Right [B] Right rear [C] Right bottom [D] Left rear [E] Left bottom [F] Left [G]
  1. Front side
  2. Right
  3. Right rear
  4. Right bottom
  5. Left rear
  6. Left bottom
  7. Left

It is advisable to avoid more than 2 blockage directions. For better ventilation & multiple-outdoor installation, please consult authorized dealer/specialist.

Installation parts you should purchase

50 mm or more (*)

50 mm or more

Bend the pipe as closely on the wall as possible, but be careful that it doesn’t break.

Vinyl tape (wide)

  • Apply after carrying out a drainage test.
  • To carry out the drainage test, remove the air filters and pour water into the heat exchanger.

Power supply cord

Bushing-Sleeve

Putty

Sleeve

Installation plate

Saddle

(Left and right are identical)

This illustration is for explanation purposes only. The indoor unit will actually face a different way.

(*)If holder at the rear of chassis (Refer column “4.3 Indoor Unit Installation”) need to be used to prop up the unit, this distance shall be 65 mm or more.